Sheet Code:
BP-IM-057_REV1
Release Date: 09/01/2020
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Brother Printer Mount
Floorstanding with
Brother Printer Mount
Assembly Instructions
Tools Required:
Socket Driver
4x M3x10mm
Buttonhead
screw
1x T10 Pin Torx
Allen Key
10mm Spanner
*or adjustable spanner
Fixings Kit
Faceplate
Tablet Set-up Kit
Case
Floorstanding
Rubber Collar
Floorstanding Base
Floorstanding
Pole
Floorstanding Cover
Pair of Keys
In the Box
(Floorstanding)
In the Box
(Printer Mount)
4x M6x25mm
Countersunk
screw
4x M4x20mm
Buttonhead
screw
1x T20 Pin
Torx Driver Bit
1x PZ3 Pozi
Driver Bit
4x M6
Locking Nut
4x M4 Split
Washer
4x M6 Split
Washer
1x Case
Washer
Fixings List
(Floorstanding)
* Due to the modular nature of our product range
you may receive additional fixings in the fixings kit
Orientate, locate and secure the Floorstanding
Pole to the Floorstanding Base as shown. Ensure
that all fixings are installed correctly.
Locate the Floorstanding
Cover over the
Floorstanding Pole.
1
2
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
M6 Nylon Locking nut
M6x25mm
Countersunk
screw
M6 Split Washer
Fixings List
(Printer Mount)
Remove Neck-Ring using
T20 driver bit and Socket
Driver
3
Feed the printer’s power cable through the Floorstanding Pole
4
Attach the printer to
the Printer Mount using
M3x10mm Screws
5
T20 Pin Torx Driver Bit
M3x10mm
Buttonhead
screw
T10 Pin Torx
Allen Key
*designed for Brother QL-820WNB
*Printer is not provided.
