9e947
c
11/24/17
9
ViewPoint Touch Screen Installation Instructions
• Plug in
the ethernet and the power supply
cables from the junction box.
Figure 14
• Install the touch screen
and the console.
See
Assembly Instructions, Touch Screen
for details.
• The wall arm mounted.
The finished installation of the wall mounted
screen.
3.4
Floor Stand Installation
The floor stand installation is nearly identical to the
wall mounted arm installation with a few exceptions.
•
It is recommended to mount the floor stand
near a wall where the junction box can be
mounted.
•
The floor stand will need to be anchored to
the floor instead of the wall. Appropriate
concrete anchors or lag bolts will need to be
used here.
•
The suggested floor stand configuration is
shown in Figure 17.
The conduit should be routed alongside, or inside,
the floor stand post.
See
Assembly Instructions, Touch Screen.
Figure 17
Figure 15
Figure 16