Magazine Release Button
Low Staple Supply Indicator Light
Housing
Spacer Bar
Staple Magazine/Magazine Extension
Clincher
•
Do not operate electric stapler with
a damaged cord or plug, after
stapler malfunctions, or has been
damaged in any manner.
•
Unplug unit from outlet before
cleaning or removing a staple jam.
Grasp plug, not the cord, when
disconnecting stapler from outlet.
•
Do not allow electrical components
to get wet.
•
Keep fingers, hair, jewelry, and
foreign objects, etc. away from
stapler opening.
•
Do not disassemble the stapler.
Should your stapler require
servicing at any time, refer to
warranty.
•
This stapler is not intended for
heavy commercial use. Do not use
the stapler for stapling hard
materials like cardboard or heavy
plastic.
•
This stapler will not operate with
transparent materials.
•
Continues using 4 hours, the unit
needs to stop using 60 minutes.
•
Please follow the safety precautions
for operation. Circumstances
against safety precautions might
affect stapling function.
General Safety
Precautions for
Electric Stapler
Do not operate stapler without
inserting paper, and refrain from
double stapling (stapling over a
staple).
Important Note Before
Beginning:
This unit is to be used on 230V AC
outlets only.
Always unplug your stapler before
cleaning or attempting to clear a
staple jam.
The stapling capacity has been
designed to staple a maximum of
45 sheets of standard bond paper.
The optical sensor firing
mechanism may not actuate
when in direct sunlight.
THIS WARRANTY IS THE EXLCUSIVE
WARRANTY OF BOSTITCH
®
L.P.,
AND IS IN LIEU OF ALL OTHER
EXPRESS WARRANTIES INCLUDING,
BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
BOSTITCH
®
L.P. SHALL NOT BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Some states and countries do not
allow the exclusion or limitation of
incidental or consequential
damages, so the above limitations or
exclusions may not apply to you.
This warranty gives you specific legal
rights, and you may also have other
rights which vary from state to state
and country to country.
For information on our warranty
claim procedure please visit us at
www.
BostitchOffice
.com
or contact
us at 1-800-343-9329.
In Canada, please contact us
at 1-800-567-7705.
7 Year Limited Warranty
U.S.A. and Canada Only
Effective December 1, 2005
Bostitch
®
L.P. warrants to the original
retail purchaser that the product
purchased is free from defects in
material and workmanship, and
agrees to repair or replace, at
Bostitch’s option, any defective
Stanley Bostitch
®
branded office
product (7) years from date of
purchase. Warranty is not
transferable. Proof of purchase date
required. This warranty covers only
damage resulting from defects in
material or workmanship; it does not
cover conditions or malfunctions
resulting from normal wear, neglect,
abuse, accident or repairs attempted
or made by other than our national
repair center or authorized warranty
service centers. Driver blades,
sharpener cutters, punch heads, and
cutting discs are considered
normally wearing parts. You are
responsible for the costs of shipping
the defective product to Stanley
Bostitch
®
or its designated repair
center. For optimal performance of
your Stanley Bostitch
®
products,
always use genuine Stanley
Bostitch
®
staples and replacement
parts.
Congratulations on
your purchase of this
premium quality
Electric Stapler.
With proper use and
care, this stapler will
serve you well for
many years.
Model B8E
UPC 0 77914 02953 3
BOSTITCH
B8 Electric
Desktop
Stapler
IMPORTANT:
Please read these instructions
completely and carefully
before operating your new
electric stapler. Keep this
instruction sheet for future
reference.
Features:
•
Low staple supply indicator light
to let you know when it is time to
reload staples.
•
Super-sensitive optical trip for
sure fire accuracy
•
High impact plastic housing.
•
Easy push-button staple loading.
•
Loads a full strip of 210
B8 staples. (STCRP2115 1/4 or
STCR2115 3/8)
•
Maximum capacity 45 sheets
of 20 lb. bond paper.
Specifications:
•
Operating Voltage - 230V AC 50 Hz
•
Operating Current - 2.0 AMPS
•
Staple Size - B8 1/4", B8 3/8"
•
Magazine Capacity - 220 Staples
•
Stapling Capacity - 2 to 45 sheets
of 20 lb. bond paper
•
Maximum Stapling Speed - 1 per
second
•
Operation stapling rate-20 staples
per minute, operation continuity
after 30 minutes shall have 10
minutes rest, but not recommended
for daily continuous use in a
manufacturing or production
environment.
•
Dimensions -
2-1/8"W x 4-7/8"H x 7-5/8"L
•
Weight - 1lb. 8oz.
•
Throat Depth - 1/2"
Low Staple Supply
Indicator Light
This stapler is designed to indicate
when staple supply is low. (A red light
will come on at the top of the stapler
and will remain on until staples are
inserted and magazine is closes.)
Low Staple Supply Indicator Light
Stapling
1. Insert paper directly under
magazine.
2. Be sure to cover staple clincher.
3. When stapling 2-20 sheets of
20 lb. Bond paper, keep dark gray
spacer bar in place.
4. When stapling 20-45 sheets of
20 lb. Bond paper, remove spacer
bar from the magazine extension.
Spacer bar can be stored
under the B8E by
snapping it into place
on the hook
in front of the
UL label
If Stapler Jams
All staplers can jam from time to time.
To clear a jam, follow these 4 easy
steps:
1. Remove AC plug from the outlet
before removing jammed staples.
2. Press magazine release button.
Magazine should eject.
3. If staple magazine does not eject,
check to insure driving element is
not down in magazine. If so, use
pen or similar object to disengage
the driving element from magazine.
4. Press magazine release button.
Magazine should now eject.
How to Load Staples:
For best performance use Stanley-
Bostitch staples, model
STCRP21151/4
or STCR21153/8
1. Press the magazine release button.
The magazine extension will eject
outward.
NOTE: DO
NOT press release
button with your face directly in
front of the stapler. It may result
in injury.
2. Grasp the magazine extension
and pull forward to insure a full
strip of staples can be inserted.
CAUTION:
There may be staples
in magazine. Be sure they are in
position before adding new strip of
staples. Make sure staple strip is
correctly inserted and properly
seated before closing.
Magazine
Magazine
Extension
3. Push the magazine back into the
housing until it is firmly locked in
position.
NOTE:
To prevent damage to the
driver element, the magazine must
be completely pushed back and
locked before stapling.
USA:
Manufactured under license by:
Amax Incorporated
East Greenwich, RI 02818
800.343.9329
Stanley® is a registered trademark of The Stanley Works or its affiliates and used under license.
Bostitch® is a registered trademark of The Stanley Works or its affiliates and used under license.
Canada:
The Stanley Works
1170 Invicta Drive
Oakville, Ontario L6H 6G1
800.567.7705
Mexico:
En Mexico Importado por:
Stanley Bostitch
S.A. de C.V. , Av. de los Angelos No. 303, Local 1-C
Col. San Martin Xochinahuac, Delegacion Azcapotzalco, Mexico
D.F. CP 02120, R.F.C. SBO-861201-7Z5
Contenido 1 pieza
55.8563.8530
