Boss WAZA, Руководство пользователя

Страница: 11 / 14

11
About Rack Mounting
By attaching the included rack-mount angles to this unit, you can
mount it in a rack.
Attaching the rack-mount angles
1.
Remove the screws from the side panels.
2.
Using the screws that you removed, attach the rack-
mount angles as shown in the illustration.
* When attaching, use only the screws that you removed.
* Do not remove any other screws.
Mounting in a general-purpose rack
* To allow heat dissipation, you must leave 1U or more space above
and below this unit.
Important notes on rack mounting
5
Install in a well-ventilated location.
5
Do not block the cooling vents located on the unit’s side
panels.
5
Avoid mounting the unit in a sealed-type rack. Warm air
within the rack cannot escape and is sucked into the unit, making
efficient cooling impossible.
5
If the back of the rack cannot be opened, install an exhaust port
or ventilation fan at the top back surface of the rack, where warm
air collects.
5
When using the unit while mounted in a movable case
(portable rack), remove the front and rear rack covers so that the
front and back of the unit are not obstructed.
5
Take care not to pinch your fingers etc. while mounting the unit
in a rack.