background image

Main Specifications

BOSS SY-300: Guitar Synthesizer

Oscillators

Three OSCILLATOR (wave: SIN, SAW, TRI, SQR, PWM, DETUNE SAW, NOISE, INPUT)

Effects

Effect (FX) x 4

CHORUS, COMPRESSOR, DELAY, EQ, FLANGER, ISOLATOR, LIMITER, LO-FI, OD/DS, PAN, PHASER, REVERB, ROTARY, SLICER, SLOW GEAR, TOUCH WAH, TREMOLO, UNI-V, 

DELAY, REVERB, DELAY+REVERB

Patch Memories

User: 99
Preset: 70

AD Conversion

24 bits + AF method

*  AF method (Adaptive Focus method): This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.

DA Conversion

24 bits

Sampling Rate

44.1 kHz

Nominal Input Level

INPUT: -10 dBu
RETURN: -10 dBu

Input Impedance

INPUT: 2.2 M ohms
RETURN: 220 k ohms

Nominal Output Level

MAIN OUTPUT: -10 dBu
SUB OUTPUT: -10 dBu

Output Impedance

MAIN OUTPUT: 2 k ohms
SUB OUTPUT: 2 k ohms

LCD

Graphic LCD (132 x 64 dots, backlit LCD )

Connectors

INPUT jack: 1/4-inch phone type
THRU jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
MAIN OUTPUT R (MONO) jack: 1/4-inch phone type
MAIN OUTPUT L (PHONES) jack: 1/4-inch phone type
SUB OUTPUT R (MONO) jack: 1/4-inch phone type
SUB OUTPUT L jack: 1/4-inch phone type
MIDI (IN, OUT/THRU) connectors
EXP/CTL4, 5 jack (1/4-inch TRS phone type)
USB port: USB type B
DC IN jack

Power Supply

AC adaptor

Current Draw

400 mA

Dimensions

255 (W) x 191 (D) x 70 (H) mm
10-1/16 (W) x 7-9/16 (D) x 2-13/16 (H) inches

Weight

1.75 kg
3 lbs 14 oz

Accessories

AC adaptor
Owner’s manual
Leaflet “USING THE UNIT SAFELY”

Options 

(sold separately)

Footswitch: FS-5U, FS-6, FS-7
Expression pedal: Roland EV-5

*  0 dBu = 0.775 Vrms
*  In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

Содержание SY-300













Отзывы: