Boss SY-200 Скачать руководство пользователя страница 16

Страница: 16 / 18

Appendix

Attaching the Rubber Feet

You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.

* When turning the unit over, be careful so as to protect the buttons and

knobs from damage. Also, handle the unit carefully; do not drop it.

* Using the unit without rubber feet may damage the floor.

Main Specifications

Power Supply

Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)

Dimensions

101 (W) x 138 (D) x 63 (H) mm / 4 (W) x 5-7/16 (D) x 2-1/2 (H)

inches (excluding rubber feet)
101 (W) x 138 (D) x 65 (H) mm / 4 (W) x 5-7/16 (D) x 2-9/16 (H)

inches (including rubber foot)

Weight

700 g / 1 lb 9 oz (including batteries)

Accessories

Owner’s Manual
Leaflet “USING THE UNIT SAFELY”
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold

separately)

AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35

* 0 dBu = 0.775 Vrms

* This document explains the specifications of the product at the time

that the document was issued. For the latest information, refer to the

Roland website.

https://roland.cm/sy-200_spec

Содержание SY-200



















Результаты поиска

Содержание SY-200

Отзывы:

Похожие инструкции для SY-200

Бренды по названию

Популярные бренды

Boss SY-200, Руководство пользователя

Результаты поиска

Содержание SY-200

Отзывы:

Похожие инструкции для SY-200

Бренды по названию

Популярные бренды