Boss RC-600 Скачать руководство пользователя страница 31

Страница: 31 / 48

System Settings (MENU)

MIDI

Parameter

Value

(Bold: default)

Explanation

RX CH

CTL

–16

Specifies the receive channel for messages (control changes) that switch memories or

control the RC-600.

RHYTHM

1–

–16

Specifies the receive channel for note messages that play the rhythm.

VOICE

–16

Sets the channel for receiving note messages used by the HARMONIST and VOCODER

effects.

TX CH

1–16,

RX CTL

Specifies the MIDI transmit channel.
If this is “RX CTL,” the channel will be the same as the RX CTL CH.

SYNC

CLOCK

Specifies the input to which the tempo clock is synchronized.

AUTO

The RC-600 will normally operate using its internal tempo, but will synchronize the tempo

to MIDI clock if MIDI clock data is being input via the MIDI IN connector or the USB port.

Choose the “AUTO” setting if using the RC-600 as a remote device.
The priority order is MIDI > USB > internal clock.

INTERNAL

The clock uses the tempo specified by the memory.
Choose the “INTERNAL” setting if you don’t want to synchronize the RC-600 to an external

device.

MIDI

Synchronize to the tempo from the MIDI IN connector.

USB (AUTO)

Synchronize to the tempo from the USB port.

OUT

OFF,

Specifies whether MIDI clock is transmitted (ON) or not transmitted (OFF).

START

Specifies what starts in synchronization when a MIDI start message is received.
OFF

Synchronized start does not occur.

ALL

Track + rhythm

RHYTHM

Rhythm

PC OUT

OFF,

Specifies whether program change messages are transmitted (ON) or not transmitted

(OFF).

THRU

MIDI IN
USB IN

Specifies the connector(s) from which MIDI messages received at the MIDI IN connector or the USB port are output.

OFF

MIDI messages are not output.

MIDI OUT

Output from the MIDI OUT connector.

USB OUT

Output from the USB port.

USB & MIDI

Output from the USB port and the MIDI OUT connector.

Содержание RC-600

















































Результаты поиска

Содержание RC-600

Отзывы:

Boss RC-600, Руководство по параметрам, Страница: 31 / 48

Результаты поиска

Содержание RC-600

Отзывы: