Boss MS-3 Скачать руководство пользователя страница 20

Страница: 20 / 49

EFFECT

SINGLE

Parameter

Value

Explanation

TIME

(DELAY TIME)

1 ms–2000 ms,
BPM –

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

FEEDBACK

0–100

Adjusts the volume that is returned to

the input. A higher value will increase

the number of the delay repeats.

E.LEVEL

(EFFECT LEVEL)

0–120

Adjusts the volume of the delay sound.

HIGH CUT

630 Hz–12.5 kHz,

FLAT

Adjusts the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

PAN

Parameter

Value

Explanation

TIME

(DELAY TIME)

1 ms–2000 ms,
BPM –

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

FEEDBACK

0–100

Adjusts the volume that is returned to

the input. A higher value will increase

the number of the delay repeats.

E.LEVEL

(EFFECT LEVEL)

0–120

Adjusts the volume of the delay sound.

HIGH CUT

630 Hz–12.5 kHz,

FLAT

Adjusts the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

TAP TIME

0–100%

Adjusts the delay time of L channel

delay.
This setting adjusts L channel delay

time relative to R channel delay time

(considered as 100%).

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

* If a mono effect or a loop is connected after this effect, the stereo effect is lost.

STEREO

Parameter

Value

Explanation

TIME

(DELAY TIME)

1 ms–2000 ms,
BPM –

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

FEEDBACK

0–100

Adjusts the volume that is returned to

the input. A higher value will increase

the number of the delay repeats.

E.LEVEL

(EFFECT LEVEL)

0–120

Adjusts the volume of the delay sound.

HIGH CUT

630 Hz–12.5 kHz,

FLAT

Adjusts the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

* If a mono effect or a loop is connected after this effect, the stereo effect is lost.

DUAL-S (DUAL-SERIES)

Parameter

Value

Explanation

1:TIME

(1:DELAY TIME)

2:TIME

(2:DELAY TIME)

1 ms–1000 ms,
BPM –

Adjusts the delay time.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

* DLY TAP applies only to 1: TIME.

1:F-BAK

(1:FEEDBACK)

2:F-BAK

(2:FEEDBACK)

0–100

Adjusts the amount of feedback of the

DELAY 1 (or DELAY 2). A higher value

will increase the number of the delay

repeats.

1:HiCUT

(1:HIGH CUT)

2:HiCUT

(2:HIGH CUT)

630 Hz–12.5 kHz,

FLAT

Adjusts the frequency at which the high

cut filter begins to take effect. When

“FLAT” is selected, the high cut filter will

have no effect.

1:E.LEVEL

(1:EFFECT LEVEL)

2:E.LEVEL

(2:EFFECT LEVEL)

0–120

Adjusts the volume of the DELAY 1

(or DELAY 2).

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

Содержание MS-3


















































Результаты поиска

Содержание MS-3

Отзывы:

Бренды по названию

Популярные бренды

Boss MS-3, Руководство по параметрам

Результаты поиска

Содержание MS-3

Отзывы:

Бренды по названию

Популярные бренды