Boss MS-3 Скачать руководство пользователя страница 18

Страница: 18 / 49

EFFECT

ROTARY

Parameter

Value

Explanation

SPEED

SLOW, FAST

Changes the simulated speaker’s rotating

speed (SLOW or FAST).

RATE SLOW

0–100,
BPM –

Adjusts the SPEED of rotation when set to

“SLOW.”

RATE FAST

0–100,
BPM –

Adjusts the SPEED of rotation when set to

“FAST.”
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings that

match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it is

then synchronized to a period either 1/2

or 1/4 of that time.

DEPTH

0–100

Adjusts the amount of depth in the rotary

effect.

RISE TIME

0–100

Adjusts the time it takes for the rotation

SPEED to change when switched from

“SLOW” to “FAST.”

FALL TIME

0–100

Adjusts the time it takes for the rotation

SPEED to change when switched from

“FAST” to “SLOW.”

B/H BAL

(BASS/HORN

BALANCE)

100:0–0:100

Adjusts the volume balance between the

BASS rotor and the HORN rotor.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect sound.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

UNI-V

Parameter

Value

Explanation

RATE

0–100,
BPM –

Adjusts the rate of the UNI-V effect.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings that

match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it is

then synchronized to a period either 1/2

or 1/4 of that time.

DEPTH

0–100

Adjusts the depth of the UNI-V effect.

LEVEL

0–100

Adjusts the volume.

SLICER

Parameter

Value

Explanation

PATTERN

P1–P20

Selects the slice pattern that will be used

to cut the sound.

RATE

0–100,
BPM –

Adjust the rate at which the sound will

be cut.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

TRG.SNS

(TRIGGER SENS)

0–100

Adjusts the sensitivity of triggering.
With low settings of this parameter,

softly picked notes will not retrigger

the phrase (i.e., the phrase will continue

playing), but strongly picked notes

will retrigger the phrase so that it will

playback from the beginning. With high

settings of this parameter, the phrase

will be retriggered even by softly picked

notes.

E.LEVEL

(EFFECT LEVEL)

0–100

Adjusts the volume of the effect sound.

D.LEVEL

(DIRECT LEVEL)

0–100

Adjusts the volume of the direct sound.
100=±0 dB

* If a mono effect or a loop is connected after this effect, the stereo effect is lost.

VIBRATO

Parameter

Value

Explanation

RATE

0–100,
BPM –

Adjusts the rate of the vibrato.
* When set to BPM, the value of each

parameter will be set according to

the value of the “MASTER BPM” (p. 26)

specified for each patch. This makes it

easier to achieve effect sound settings

that match the tempo of the song.

* If, due to the tempo, the time is longer

than the range of allowable settings, it

is then synchronized to a period either

1/2 or 1/4 of that time.

DEPTH

0–100

Adjusts the depth of the vibrato.

TRIGGER

OFF, ON

Selects on/off of the vibrato.
* It is assumed that this parameter will

be assigned to the footswitch.

RISE TIME

0–100

Adjusts the time passing from the

moment the TRIGGER is turned on until

the set vibrato is obtained.
* When a patch with TRIGGER set to

ON is called up, the effect obtained

is identical to what happens when

TRIGGER is switched from Off to

On. If you want the vibrato effect to

be produced immediately after the

patches are switched, set RISE TIME

to 0.

LEVEL

0–100

Adjusts the volume.

* If a mono effect or a loop is connected after this effect, the stereo effect is lost.

Содержание MS-3


















































Результаты поиска

Содержание MS-3

Отзывы:

Бренды по названию

Популярные бренды

Boss MS-3, Руководство по параметрам

Результаты поиска

Содержание MS-3

Отзывы:

Бренды по названию

Популярные бренды