18
Making Global Settings (System Settings)
Restoring the Factory Settings (Factory Reset)
Settings that are shared by the entire ME-80 are called “system
settings .”
System Setting Procedure
1.
Press the [MEMORY/MANUAL] pedal to switch to Manual
Mode (p . 12) .
2.
Press the [EDIT] button to choose the item you want to
set .
The item switches with each press of the [EDIT] button .
3.
Choose the setting value with the [BANK ] and
[BANK ] pedals .
4.
Press the [WRITE] button .
The setting is saved in memory .
List of Settings
Item
Display
Explanation
Knob operation
n0
The value changes immediately as
the knob is turned (factory setting) .
n1
The value changes once the
knob is turned past the position
corresponding to the currently set
value .
USB LEVEL
LO
to
L9
Adjusts the level of the audio input
from the computer that will be
mixed with the sound processed by
the ME-80’s effects .
Item
Display
Explanation
USB DIRECT
MONITOR
*
d1
at power on
D0
The sound of the ME-80 will not be
output to the REC OUT/PHONES
jack and Gt . AMP OUTPUT jacks .
D1
The sound of the ME-80 will be
output to the REC OUT/PHONES
jack and Gt . AMP OUTPUT jacks .
USB LOOPBACK
B0
The input from the computer will
not be output to USB OUT .
B1
The input from the computer will
be output to USB OUT .
USB DRY REC
R0
The sound of guitar being output
from USB OUT will be processed by
the ME-80’s effects .
R1
The sound of guitar being output
from USB OUT will not be processed
by the ME-80’s effects .
MIDI channel
settings
c1
to
c9
,
c
.
0
to
c
.
6
ch . 1 to ch . 9,
ch . 10 to ch . 16
Output settings
while tuning
T0
The sound will not be output while
tuning .
T1
The sound will be output while
tuning .
Control operations
when switching
banks
H0
When you press the bank pedal to
switch the bank, the patch doesn’t
change although the display
changes . The bank and the patch
number are confirmed by pressing
the number pedal, then the patch
changes to the next one .
H1
The patch changes to the next one
as soon as you press either the bank
pedal or the number pedal .
Control operations
when switching to
Manual Mode
m0
When you switch to Manual Mode,
the current knob positions will
affect the sound .
m1
When you switch to Manual Mode,
the setting stays the same as when
in Memory Mode .
Auto Off settings
o0
The power will not turn off
automatically .
o1
The power will automatically turn
off when 10 hours have passed
since you last played or operated
the ME-80 (Factory Setting) .
You can restore the settings in the ME-80 (User patch, tuner
reference pitch, and knob response method) to the values set when
the unit was shipped from the factory .
1.
Press the [MEMORY/MANUAL] pedal to switch to Manual
Mode (p . 12) .
2.
Press the [MOD] pedal while holding down the [EDIT]
button .
“
FA
” appears in the display .
3.
Press the [WRITE] button .
The Tuning Guide flashes .
4.
Press the [WRITE] button again .
The display flashes and the factory reset is executed .
* Never turn off the power while Factory Reset is in progress .
Содержание ME-80
Страница 2: ......
Страница 157: ......
Страница 158: ...For EU Countries For China ...
Страница 160: ... 5 1 0 0 0 3 7 4 0 8 0 2 ...