manualshive.com logo in svg

Boss MD500, Руководство пользователя

Поделиться
Скачать
Boss MD500 Скачать руководство пользователя страница 23

23

Convenient Functions

Using Two Patches Simultaneously (Simul Mode)

If FSW MODE is set to “A/B SIMUL,” you can use two patches A and B simultaneously (simul mode).

1  

Set FSW MODE to “A/B SIMUL” (p. 22).

2  

Press the unlit [A] or [B] switch to make them both light.

Now you can use two patches simultaneously.

MEMO

 

5

The patch that’s selected in the screen (selected by the [

I

] [

H

] buttons) is the patch that 

your editing will affect.

 

5

The TAP/CTL (p. 7) and external footswitch setting (p. 25) apply to both patches A and B.  

The lit/blinking state of the [TAP/CTL] switch follows the setting of the patch that’s selected 

in the screen.

Simul mode settings (BANK)

Here’s how to specify how patches A and B are connected and output when in simul mode.

1  

Press the [EDIT] button.

2  

Use the [

H

] [

I

] buttons to select “BANK,” and then press the [EDIT] 

button.

3  

Use the [

H

] [

I

] buttons to select a parameter, and use the [RATE/

VALUE] knob to edit the value.

Parameter

Value

Explanation

CONNECTION

Specifies how patches A and B are connected.
SERIES

Patches A and B are connected in series, in the order A

0

B.

PARALLEL

Patches A and B are connected in parallel.

OUTPUT MODE

 (*1)

Specifies how sound is output from the OUTPUT A/MONO and B jacks.
MIX

Patches A and B are mixed and output.

A/B

Sound that is input to the INPUT A/MONO jack passes through 

patch A and is output to the OUTPUT A/MONO jack.
Sound that is input to the INPUT B jack passes through patch B 

and is output to the OUTPUT B jack.

INSERT SW

Specifies the connection position at which an external effect unit is inserted by 

the insert loop function (p. 24).
OFF

Not connected.

PRE

Connected before patches A and B.

POST

Connected after patches A and B.

MIDDLE (*2) Connected between patches A and B.

SYNC (*3)

OFF, ON

Selects whether the tempo of patch B is synchronized to the 

tempo of patch A (ON) or is not synchronized (OFF).
NOTE can be adjusted for each patch.

*1: Shown if CONNECTION is “PARALLEL”
*2: Shown if CONNECTION is “SERIES”
*3: Not available for modes that do not have RATE or BPM

4  

Press the [EXIT] button to return to the top screen.

Selected patch

Содержание MD500































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды