manualshive.com logo in svg

Boss MD500, Руководство пользователя

Поделиться
Скачать
Boss MD500 Скачать руководство пользователя страница 18

18

Parameter List

CONTROL

You can specify the functions of the [TAP/CTL] switch and of a footswitch or expression pedal 

connected to the CTL 1,2/EXP jack.

 

5

“Using the [TAP/CTL] Switch to Control the Effect” (p. 7)

 

5

“Assigning a Function to an External Pedal” (p. 25)

ASSIGN

ASSIGN INPUT SENS

Parameter

Value

Explanation

ASGN INPUT SENS

0–100

Adjusts the input sensitivity when “INPUT” is selected for SRC.

ASSIGN 1–8

Parameter

Value

Explanation

SW

OFF, ON

Turns the ASSIGN 1–8 on/off.

SRC (SOURCE)

Specifies the controller (source).
TAP/CTL

[TAP/CTL] switch.

EXP PDL
(EXP PEDAL)

External expression pedal (EV-30, EV-5 etc.; sold separately) connected to the 
CTL 1,2/EXP jack.

CTL1, 2 PDL

External footswitch connected to the CTL 1,2/EXP jack.

INT PDL

Internal pedal

The virtual expression pedal will begin operating when started 

by the specified trigger (TRIGGER), modifying the parameter 

specified by “TARGET.”
For details on the parameters that can be assigned to the internal 

pedal, refer to “TIME” and “CURVE” (p. 19)

WAVE PDL

Wave pedal

The virtual expression pedal will cyclically modify the parameter specified by 

“TARGET” in a fixed wave form.

INPUT
(INPUT LEVEL)

The assigned target parameter will change according to the input level.
*  If you want to adjust the input sensitivity, set the SENS (INPUT SENS).

CC#1–31, CC#64–95

Controller number from an external MIDI device

MODE (SOURCE MODE)

Specifies the operation of the controller.

MOMENT

The value will normally be OFF (minimum value), and will be ON 

(maximum value) only while the control is being operated.
*  If you want to use the internal pedal or wave pedal, set to “MOMENT.”

TOGGLE

The value will toggle between OFF (minimum) and ON (maximum) each time the 

control is operated.

TRG (TARGET)

This selects the parameter to be changed.

MIN (TARGET MIN)
MAX (TARGET MAX)

Specifies the range of change for the parameter. The values will depend on the parameter that’s assigned by 

“TARGET.”

Содержание MD500































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды