background image

 

Thank you, and congratulations on your choice of BOSS OD-20 Overdrive/Distortion. 

 

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY”

and “IMPORTANT NOTES” (separate sheet). 

 

These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature
provided by your new unit, this manual should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference. 

 

Main Features

 

 

Thanks to COSM technology, this distortion pedal delivers some of the most powerful
distortion you’ve ever heard. You get 22 different kinds of distortion sound, from vintage
classics to new, original sounds.

 

 

Features ATTACK SHAPE for changing the picking expression, and a HEAVY OCTAVE
feature, which produces a fat octave sound, allowing you to create an even wider variety of
sounds.

 

 

With four Memories plus Manual, you can use the pedal to switch through a total of five
sounds.

 

 

Built-in Amp Control feature makes it possible to switch amp channels and perform other

 

controls that make your setup even more powerful when combined with an amp.

 

Copyright © 2001 BOSS CORPORATION

All rights reserved. No part of this publication may 

be reproduced in any form without the written 

permission of BOSS CORPORATION.

Содержание Drive Zone OD-20





























Отзывы: