81
Chapter 8. Creating an Original Drum Kit
Chap.8
Adjusting the Reverb Depth
NOTE
If the output destination has been set to the individual output,
reverb cannot be used.
1.
After selecting a drum kit, press [REV/FLANG] several
times to make “REVERB” blink.
2.
Use [VALUE*] to set the Reverb Level (the overall
reverb depth for the entire drum kit).
Range: 0–9
fig.108-33a
NOTE
If the Reverb Level is set to “0,” no reverb will be heard even if the
Reverb Send Level (see below) is raised.
3.
Press the pad for the instrument whose Reverb Send
Level you want to set.
As necessary, use [PAD BANK] to switch the pad bank.
The pad number and the current Reverb Send Level will
be displayed.
fig.108-34a
■
If you wish to set the Reverb Send Level for the
instruments of pad numbers 33 (-01)–55 (-23), use the
following procedure to select the pad number.
1) Press [ENTER].
2) Use [
] [
]to select the pad number.
At this time you can press [ENTER] to play the
instrument.
4.
Use [VALUE*] to set the Reverb Send Level.
Range: 0–9
■
If you press [STOP/EXIT] you will return to the Reverb
Level setting (the display will indicate “ALL”).
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If in step 3 you use [PAD BANK] to layer the pad banks, you
can set the Reverb Send Level for instruments of both banks
A and B simultaneously.
This is a convenient way to make settings for a drum kit that
uses pad bank layering.
However, if different values have been set for banks A and B,
using [VALUE*] will adjust the values while preserving their
proportion.
fig.108-35a
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Adjusting the Flanger Depth
1.
After selecting a drum kit, press [REV/FLANG] several
times to make “FLANGER” blink.
2.
Use [VALUE*] to adjust the Flanger Level (the overall
flanger depth for the entire drum kit).
Range: 0–9
fig.108-35b
NOTE
If the Flanger Level is “0,” no flanger effect will be heard even if the
Flanger Send Level (see below) is raised.
3.
Press the pad for the instrument whose Flanger Send
Level you want to set.
If necessary, use [PAD BANK] to switch the pad bank.
The display will indicate the pad number and the
current Flanger Send Level.
fig.108-35C
PAD BANK
A
B
TEMPO DPP
DRUM KIT
REVERB
IND
FLANGER
PATTERN
SONG
PAD NUMBER
Reverb Level
PAD BANK
A
B
TEMPO DPP
DRUM KIT
REVERB
IND
FLANGER
PATTERN
SONG
PAD NUMBER
Pad number where the Reverb Send Level should be set
PAD BANK
A
B
TEMPO DPP
DRUM KIT
REVERB
IND
FLANGER
PATTERN
SONG
PAD NUMBER
Reverb Send Level of
pad number A13
Reverb Send Level of
pad number B13
PAD BANK
A
B
TEMPO DPP
DRUM KIT
REVERB IND
FLANGER
PATTERN
SONG
PAD NUMBER
Flanger Level
PAD BANK
A
B
TEMPO DPP
DRUM KIT
REVERB IND
FLANGER
PATTERN
SONG
PAD NUMBER
Pad number where the Flanger Send Level should be set
Содержание Dr. Rhythm DR-770
Страница 119: ...119 MEMO...