Troubleshooting
Problem
Possible Cause
Corrective Action
1. The battery connections are corroded.
1. Clean the battery connections.
2. The 40 amp in-line fuse in the vehicle
side harness in bad.
2. Replace the fuse.
The controller has no power (the green
LED is not on).
3. The controller is not plugged into the
vehicle side harness.
3. Plug in the controller.
1. The spreader and vehicle wire
harnesses are not connected.
1. Connect the wire harnesses.
2. The controller is not plugged into the
vehicle side harness.
2. Plug in the controller.
The spinner motor does not work.
3. The spinner motor is not connected to
the spreader side harness.
3. Contact your Authorized Service
Dealer.
The red LED is lit on the controller.
1. The spreader is jammed.
1. Refer to the Freeing a Clog section.
1. The connection between the auger and
spinner and the motor shaft is bad.
1. Contact your Authorized Service
Dealer.
The spinner motor works but the spinner
and auger are not turning.
2. The connection between the motor
shaft and the motor hub is bad.
2. Contact your Authorized Service
Dealer.
12