Product Overview
g382943
Figure 18
1.
Lid
4.
Material deflector
2.
Hopper
5.
Motor box
3.
Material deflector
adjustment knob
Controls
Become familiar with all of the controls before you
operate the spreader.
Material Deflector
The material deflector controls the spread of materials;
you can adjust the controls to provide different spread
patterns; refer to
Adjusting the Material Deflectors
(page 11)
Controller
The spreader controller lets you operate your spreader
and displays information about your machine.
g293836
Figure 19
1.
Blast button
4.
Slow button
2.
Power button
5.
Fast button
3.
Speed LED’s
•
Power button—turns the spreader controller and
spinner motor on or off. Press once to turn the
controller on. Press again to turn the spinner motor
on or off. Hold the button to turn the controller off.
•
Blast button—momentarily sends full power to the
spinner motor as long as it is held
•
Fast button—increases the spinner motor speed
•
Slow button—decreases the spinner motor speed
•
Speed LED’s—indicates the spinner motor speed
and operating mode.
Specifications
Note:
Specifications and design are subject to
change without notice.
Height
73.6 cm (28-32 inches)
Width
31.75 cm (12.5 inches)
Depth
51.4 cm (20.25 inches)
Weight (empty)
22.7 kg (50 lb)
Capacity
0.024 m
3
(0.85 ft
3
)
9