THIS PACKAGE CONTAINS
1 - BRRC14 Soundbar Speaker System
1 - Bluetooth Multi-Function Controller Kit
1 - 1.50” Rollbar Mounting Kit
1 - 1.75” / 2.00” Rollbar Mounting Kit
1 - Quick Connect Power Cable
1 - User Manual Quick Start Guide / Poster
1 - Warranty Card / Facebook Card
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by
user. This equipment complies with FCC/ IC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is desirable that it should
be installed and operated keeping the radiator at least 20 cm or more away from
person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration
RUPRGL¿FDWLRQVFDUULHGRXWZLWKRXWDSSURSULDWHDXWKRUL]DWLRQPD\LQYDOLGDWHWKH
user’s right to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residen-
tial installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
GHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRႇDQGRQWKHXVHULVHQFRXUDJHGWRWU\WR
correct the interference by one or more of the following measures:
Ƒ5HORFDWHRUUHRULHQWWKHUHFHLYLQJDQWHQQD
Ƒ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
Ƒ&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLႇHUHQWIURPWKDWWRZKLFKWKH
receiver is connected.
Ƒ&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
USER MANUAL
QUICK START GUIDE
Thank you for purchasing this
BRRC14 Soundbar Sound System
Please read through these instructions carefully so you will know
how to operate your model properly.
$IWHU\RXKDYHÀQLVKHGUHDGLQJWKHLQVWUXFWLRQVNHHSWKLVGRFXPHQW
in a safe place for future reference.
INFORMATION TO THE USER
INFORMATION TO THE USER
T
he Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks is under license.
Other trademarks and trade names are those of their respective owners.
CAUTION!!
ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
GETTING TO KNOW YOUR
BRRC14 MULTIFUNCTION CONTROLLER (MFC)
BEFORE YOU START
IMPORTANT SAFETY PRECAUTIONS
Ŷ
'RQRWRSHUDWHPRELOHHTXLSPHQWZKLOHGULYLQJDPRWRUL]HGYHKLFOH±VDIHGULYLQJDQG
safety consideration of others should always be your highest priority
Ŷ
In the event you should notice smoke, strange noises or odor from this product, or any
RWKHUDEQRUPDOVLJQVLPPHGLDWHO\WXUQRႇWKHSRZHUDQGFRQVXOW\RXUGHDOHURUWKHQHDUHVW
DXWKRUL]HG
BOSS AUDIO
Service Center. Using this product in this condition may result in
permanent damage to the system
Ŷ
Set your volume control at a low setting, then slowly increase the sound until you can
hear it comfortably without distortion, or ear discomfort
Ŷ
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES
:
- Do not turn up the volume so high that you can’t hear what’s around you
8VHFDXWLRQRUWHPSRUDULO\GLVFRQWLQXHXVHLQSRWHQWLDOO\KD]DUGRXVVLWXDWLRQV
INSTALLATION PRECAUTIONS
WARNING
- Always consult a professional installer
Ŷ
Do not attempt to install or service this product by yourself. Installation or servicing of this
product by persons without professional training and experience in electronic equipment
DQGPRWRUL]HGYHKLFOHDFFHVVRULHVPD\EHGDQJHURXVDQGFRXOGH[SRVH\RXWRWKHULVNRI
HOHFWULFVKRFNLQMXU\RURWKHUKD]DUGV
Ŷ
5HIHUDQ\UHSDLUVWRDTXDOL¿HG
BOSS AUDIO SYSTEMS
Service Center
Ŷ
The
BRRC14
should be hard wired directly to the main vehicle battery
Ŷ
When wiring directly to the vehicles battery, be sure to disconnect the batteries negative
terminal wire before starting any wiring procedures
Ŷ
The ground cable length should be short as possible (See wiring diagram)
Ŷ
The
BRRC14
has a weather resistant design, it should not be under any circumstances
submerged in, or under water
Ŷ
Use only the supplied installation parts provided with the
BRRC14
Ŷ
Wash with a mild detergent and lukewarm water using a clean sponge or a soft cloth
Ŷ
Rinse well with clean water
“DO NOT’S” - Very Important
Ŷ
DON’T clean in hot sun or on very hot days
Ŷ
DON’T use abrasive or highly alkaline cleaners on the main body
Ŷ
'21¶7VFUDSHWKHPDLQERG\ZLWKUD]RUEODGHVRURWKHUVKDUSLQVWUXPHQWV
Ŷ
DON’T ever use, gasoline, acetone or carbon tetrachloride
Ŷ
DON’T ever use a pressure washer aimed at the speakers
GETTING STARTED
A
1
2
3
4
5
6
7
8
9
8
7
4
2
3
A
MFC - MULTIFUNCTION CONTROLLER
DOME LIGHT ON/OFF -
(Auto 10 minute timer when MFC ACC is turned OFF)
POWER ON/OFF
- Press and hold for 3 seconds
LOUDNESS ON/OFF -
Single Press
NEXT TRACK -
FF press and hold
PLAY/PAUSE -
AUX MUTE
BLUETOOTH PAIRING INDICATOR LED
- BLUE / AUX RED COLOR
PREVIOUS TRACK -
FR press and hold
VOLUME DOWN -
Ramp DOWN press and hold
VOLUME UP -
Ramp UP press and hold
CAUTION!! Using other mounting methods may void this warranty
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the
MFC
by long-pressing the
3
Power button
for 3 seconds, long-press the
6
Bluetooth
button for 3 seconds, the
BLUE LED
ZLOOVWDUWWRUDSLGO\ÀDVKVLJQDOOLQJWKDW
the
MFC
is now ready for
Bluetooth
pairing
NOTE:
You have 2 minutes before you must restart this procedure over again.
2) The
MFC
is now in pairing mode:
ANDROID users:
a. Go into the
Settings Menu
of your device
b. Enter the
Bluetooth Menu
c.
TURN ON Bluetooth
and press
SCAN
d.
“BOSS REBEL UTV”
will now be displayed under
AVAILABLE DEVICES
e. If prompted, enter passcode: “
0000
”
iOS users:
a. Go into the
Settings Menu
of your
iOS
device
b. Enter the
Bluetooth Menu
c
. TURN ON Bluetooth
d.
“BOSS REBEL UTV”
will now be displayed
e. If prompted, enter passcode: “
0000
”
3) If
BOSS REBEL UTV
is not seen, repeat the above steps to refresh the “
Device List”
4) When the connection is successful a tone will be heard, and the
Bluetooth
LED indicator
will light solid, you are now ready to stream music from your favorite media player to the
MFC
Using this product without running the engine can drain the battery.
To avoid battery exhaustion, be sure to occasionally run the
vehicles engine while using this product.
BLUETOOTH OPERATION
STREAMING MUSIC
RECONNECTION
1) Power on the
MFC
and your last paired device Bluetooth.
2) Ensure you are within range of the
MFC
, the unit will now automatically reconnect
3) If the device is out of range from the
MFC
, it will disconnect automatically:
a.
The
MFC
will reconnect automatically to your device when in range
4) If your device was previously paired with the
MFC
, but it wasn’t the last paired device:
a. Ensure no other devices are currently paired
b. Enter the
Bluetooth Menu
on your device being paired
c.
“BOSS REBEL UTV”
will display under
AVAILABLE DEVICES
d. Choose the
“BOSS REBEL UTV”
to reconnect
5) To clear all previously paired devices from memory, press and hold the
MFC Bluetooth
button for 10 seconds
NOTE:
Some devices may require a manual
Bluetooth
reconnection once the devices
Bluetooth
is powered
OFF / ON
and/or back in range, repress the
BOSS REBEL UTV
button in BLUETOOTH settings on your device
3
Tips:
MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION
1) Press the
5
PLAY/PAUSE
once to start playing music or press the
PLAY
button from
your devices touch screen
2) To skip songs or advance, press the
4
NEXT TRACK
button
3) To select the previous song, press the
7
PREVIOUS TRACK
button
VOLUME CONTROL
4) To raise the volume press the
9
VOLUME UP
button or use your devices controls
5) To lower the volume press the
8
VOLUME DOWN
button or use your devices controls
NOTE:
If
BLUETOOTH
or
AUX
is disconnected for more than 10 minutes the
MFC
will
automatically turn
OFF
, however, when not in use the
ACC
switch should be manually
turned
OFF
to keep the vehicles main battery from draining
MULTIFUNCTION CONTROLLER AUX-IN OPERATION
1) Power on the
MFC
by pressing and holding down the
3
POWER
button for 3 seconds
2) Disconnect any paired
Bluetooth
GHYLFHE\WXUQLQJRႇ
Bluetooth
in your devices
Settings Menu
3) Connect your 3.5mm
AUX-IN
cable located on front side of the
MFC
to your devices
headphone jack
4) Route the wire back to
MFC
, secure your device in a safe location
VOLUME CONTROL
5) To raise the volume press the
9
VOLUME UP
button
6) To lower the volume press the
8
VOLUME DOWN
button
7) To
MUTE
the volume press the
5
PLAY/PAUSE
button
AUX-INPUT
Make sure your device Bluetooth volume is set at 100% level
before stowing your device
BEFORE YOU START INSTALLATION
Make sure your device headphone volume is set at 100% level
before stowing your device
MFC
can play audio from
any device that has a 3.5mm
headphone audio jack.
INSERT
(Cable not included)
YOUR
DEVICE
Tips:
Tips:
MULTI-FUNCTION CONTROLLER MOUNTING
TOOLS NEEDED:
-
Crimp
Tool
- Wrench or Pliers
-
3mm
Allen
Wrench
MOUNTING THE SOUNDBAR
:KHQUHSODFLQJWKHIXVHEHVXUHWRRQO\XVHDIXVHRIWKHUDWLQJVSHFL¿HGRQ
this product. To avoid short-circuiting, cover any disconnected leads with insulating
tape. It is especially important to insulate any unused wires, which if left uncovered
may cause a short circuit. When connecting other devices to this product, refer to
the manual for the product to be connected. The black cable is ground, make sure
WRFRQQHFWWKHJURXQGZLUH¿UVW(QVXUHWKDWWKHJURXQGZLUHLVSURSHUO\FRQQHFWHG
to metal parts of the vehicles body frame or direct to the battery if your vehicle
does not have a grounded chassis frame The ground wire of this units power amp
and a second powered system must be connected to the frame separately with
GLႇHUHQWVFUHZV,IWKHVFUHZIRUWKHJURXQGZLUHORRVHQVRUIDOOVRXWLWFRXOGUHVXOW
LQ¿UHRUPDOIXQFWLRQ
To avoid potential shorts in the electrical
V\VWHPEHVXUHWRGLVFRQQHFWWKH±
battery cable before installation. Use this
XQLWZLWKD9ROWEDWWHU\DQGQHJDWLYH
grounding only. Failure to do so may result
LQD¿UHRUPDOIXQFWLRQ
BRRC14
RECOIL SERIES
BLUETOOTH
®
| 14” AMPLIFIED SOUNDBAR SYSTEM
USER’S MANUAL
QUICK START GUIDE
BRRC14
USER’S MANUAL
RECOIL SERIES
14” AMPLIFIED SOUNDBAR SOUND SYSTEM
WITH BLUETOOTH REMOTE CONTROLLER
PRINTED IN CHINA
VER:1.1 EN
iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries
Android is a trademarks of Google Inc. registered in the U.S. and other countries.
%266$XGLR6\VWHPVLVQRWDႈOLDWHGZLWK$SSOH,QFRU*RRJOH,QF
317
BOSS Audio Systems
/XQDU&RXUW2[QDUG&$
www.bossaudio.com
_
Tech Support: www.bossaudio.com/support/technical-support
BLUETOOTH
9HUVLRQ
$'3$95&3*$77
5DQJHIWP&ODVV
/RXGQHVV(4
5&$/LQH2XWSXW9506
SPEAKERS
'LPHQVLRQ´
&RQH7\SH33&$5%21
7ZHHWHU6L]H´62)7'20(
AMPLIFIER
0D[LPXP2XWSXW3RZHU:DWWV
,QSXW,PSHGDQFHNȍ
)UHTXHQF\5]N+]
GENERAL
2SHUDWLRQDO3RZHU9'&9DOORZDEOH
0$;&XUUHQW'UDZ$
86%&KDUJLQJ$#9'&
5HSODFHPHQW)XVH$$727<3(
&DELQHW0DWHULDO$OXPLQXP([WUXVLRQ
&RORU%ODFN3RZGHU&RDWLQJ
SPECIFICATIONS
WIRE DIAGRAM
Dimensions:
14.02" (356mm) x 4.98" (126.5mm) x 5.55" (141mm)
Weight:
9.92 lbs (4.5 kg)
5.55"
(141mm)
14.02"
(356mm)
4.98"
(126.5mm)
15A
Fuse and fuse holder
Chassis
ground
point
BATTERY
Replace with 15A only
INSERT
DIRECT BATTERY WIRING CIRCUIT
RED
BLACK
Chassis
ground
point
MFC
Ground wire
Metal frame
( AUX Cable not included)
INSERT
RED
BLACK
ACC SWITCH
LINE OUT
(-) ORANGE
(+) BLUE
DOME LIGHT
AMP REMOTE INPUT
RIGHT
LEFT
GROUND
CRIMP
DAISY CHAIN
LINE OUTPUTS
LINE IN
(-) MOMENTARY TO ACTIVATE
3A
:HLJKWOEVNJ
'LPHQVLRQV,QFKHV:[+['[[
'LPHQVLRQVFP:[+['[[
6WRUDJH7HPSHUDWXUH
o
F to 175
o
F / -15
o
&WR
o
C
2SHUDWLRQ7HPSHUDWXUH
o
F to 140
o
F / 0
o
C to 60
o
C
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including
photocopying, recording, or other electronic or mechanical methods, without the prior written permission of BOSS AUDIO Inc.
Copyright © 2017 BOSS AUDIO Inc.
BLUETOOTH OPERATION
CAUTION!!
Mounting brackets should be periodically checked to be sure they are tight
and secure before use of the vehicle.
9
3.5mm AUX-INPUT
CABLE NOT INCLUDED
USB 1A
CHARGING
NOT FOR AUDIO PLAYBACK
OPEN
ALWAYS CLOSE COVER WHEN
NOT IN USE NEVER USE WHEN
IN MUD and/or WATER
1
5
6
6
7
4
5
8
9
5
8
9
3
1) Determine the size
rollbar
for your vehicle, install rubber
bushings
on
rollbar
2) Insert and align notch of
rubber bushings
into the
aluminum brackets
3) Apply supplied
Loc-Tight
to
allen bolt
tips, let dry for 20 minutes, then align
the
allen bolts
and
T-nuts
into the
T-channel
¿UPO\WLJKWHQ
4) Recheck all
allen bolts
are tight, ensure
T-nut’s
are properly seated in the
T-channel
correctly
Your Rollbar
Rubber Bushing
Rubber Bushing
INSTALLATION PARTS
1.5”
1.75”
2”
RUBBER BUSHINGS
1.5”
1.75” or 2”
BRACKETS
ROLLBAR / CAGE MOUNT
ALIGN CONNECTOR
PINS, INSERT and
HAND TIGHTEN
1.5”
1.75”
2.00”
FLUSH MOUNT
SURFACE MOUNT
NEVER C12V
TO THE DOME WIRE
LED DOME - ON/OFF
MUTE - ON/OFF
STATUS INDICATOR
WHITE = ON
RED = STANDBY
CAUTION:
NEVER CONNECT THE
MFC
DIRECTLY
TO THE BATTERY, ALWAYS USE AN
ACCESSORY SWITCH
CAUTION!!
Never use
USB
or
AUX
while in
mud and/or water
Close USB cover
when not in use
ONBOARD CONTROL PANEL
Some applications may require
optional friction tape between
rubber bushings for a secure,
WLJKW¿WWKLVFDQEHIRXQGDW
most local hardware stores
1) Always check mounting depth before cutting
8VHWKHÀXVKEH]HODVWHPSODWH
&XWRXWKROHH[DFWO\
,QVHUWÀXVKPRXQWEH]HOSXVKVLGHWDEVRXWZDUGV
8VHRSWLRQDOVLOLFRQJOXHWRJLYHH[WUDKROG
6) Insert
MFC
1) Check mounting depth before drilling
8VHWKHÀXVKEH]HODVWHPSODWH
'ULOORUFXWZLUHKROHH[DFWO\
,QVHUWUXEEHUWULPDURXQGÀXVKEH]HO
screw in place
5) Insert
MFC
MFC can rotate 90
o
for the
best mounting position
3mm Allen Head
3mm Allen Head
T-nut must be assembled
LQWKLVFRQ¿JXUDWLRQ
Align notch
Align notch
OPTIONAL
OPTIONAL
OPTIONAL TOOLS NEEDED:
- Hand saw or Jigsaw
NOTE!!
7RFRQVHUYHEDWWHU\OLIHWKH/(''RPHOLJKWZLOODXWRPDWLFDOO\WXUQRႇDIWHU
10 minutes when MFC ACC is turned OFF
BOSS REFLEX SERIES
OPTIONAL SYSTEM
EXPANSIBILITY
MFC RESET
LONG PRESS BOSS
LOGO FOR 10 SECONDS
