background image

 

68

 

Using Insert Effects

 

With “BASS MULTI” or “GUITAR TO 
BASS” algorithms

 

COSM technology simulates different preamp 
characteristics, speaker sizes, and cabinet shapes.

 

TONE

 

-50–+50

Adjusts the tone.

 

E.LEVEL (Effect Level)

 

0–100

Adjusts the volume of the effect sound.

 

D.LEVEL (Direct Level)

 

0–100

Adjusts the volume of the direct sound.

 

Parameter/
Range

Explanation

 

ON/OFF

 

OFF, ON

Turns the DISTORTION effect on/off. 

 

TYPE

 

Selects the type of distortion.

BOOSTER

This not only functions as a booster, but 
also produces a clean tone that has punch 
even when used alone.

NATURAL

This is an overdrive sound that provides 
distortion with a natural feeling.

BASS DRIVER

Models the TECH21 SANSAMP BASS 
DRIVER DI.

BASS OD

Overdrive tuned especially for use with 
basses.

BLUES OD

This is a crunch sound of the BOSS BD-2.
This produces distortion that faithfully re-
produces the nuances of picking.

BASS DS

Distortion tuned especially for use with 
basses.

GUV DS

This models a Marshall GUV’ NOR.

BASS MT

Wild, radical distortion sound.

METAL 
ZONE

This is the sound of the BOSS MT-2.
It produces a wide range of metal sounds, 
from old style to slash metal.

BASS FUZZ

Fuzz tuned especially for use with basses.

MUFF FUZZ

This models an Electro-Harmonix big Muff 

 

π

 

.

HI BAND 
DRV

With this effect, distortion is applied only 
to the high frequency sounds, and not to 
the sounds in the low frequency range.

 

DRIVE

 

0–100

Adjusts the depth of distortion.

 

TONE

 

-50–+50

Adjusts the tone.

 

Parameter/
Range

Explanation

 

E.LEVEL (Effect Level)

 

0–100

Adjusts the volume of the effect sound.

 

D.LEVEL (Direct Level)

 

0–100

Adjusts the volume of the direct sound.

 

BOTTOM

 

0–100

Extracts the low-frequency components of 
the sound input to this effect, and adjusts 
the amount added to the effect sound.

 

AMP

 

Parameter/
Range

Explanation

 

ON/OFF

 

OFF, ON

Turns the AMP effect on/off.

 

TYPE

 

This sets the type of the preamp.

JC CLEAN

BOSS CLEAN

This is a clean sound that is smooth and 
warm.

JC-120

This is the sound of the Roland JC-120.

JAZZ COMBO This is a sound suited to jazz.

FULL RANGE

This is a sound with flat response. 
Good for acoustic guitar.

TW CLEAN

CLEAN TWIN This models a Fender TWIN REVERB.

PRO CRNCH

This models a Fender PRO REVERB.

TWEED

This models a Fender Bassman 4 x 10” 
Combo.

DELUX 
CRNCH

This models a Fender DELUXE RE-
VERB.

CRUNCH

BOSS CRNCH

This is a crunch sound that can faithful-
ly reproduce the nuances of picking.

BLUES

This is a sound suited to blues.

WILD 
CRNCH

This is a crunch sound with wild dis-
tortion.

STACK
CRNCH

This is a crunch sound with high gain.

COMBO

VO DRIVE

This models the drive sound of a VOX 
AC-30TB.
This is a sound that it suited to sixties-
style British rock.

VO LEAD

This models the lead sound of the VOX 
AC-30TB.

VO CLEAN

This models the clean sound of the 
VOX AC-30TB.

 

Parameter/
Range

Explanation

BR800_e.book 68 ページ 2010年11月2日 火曜日 午前8時28分

Содержание BR-800





































































































































































Отзывы: