7
OPERATION
Powering ON/OFF
Press PWR button (3) to turn on the unit. When
the unit is on. Press and hold for 2 seconds to
turn off the unit.
Audio Adjustment
Press SEL button to cycle.
→
BAS-TRE-BAL -LOUD-EQ-ST-DX-VOL
BAS: Bass
TRE: Treble
BAL: Balance
LOUD:
Loudness
EQ: Preset EQ Curves
DX: Distance
LOC:
Local
VOL: Volume
Display Time
Press CLK button to display the time.
Clock Adjustments
-Press DISP
-Press and Hold DISP for 2 seconds
“HH” will flash, using the volume, change the
hour.
-Press DISP button once more for minuets
“MM” will flash using the volume, change the
minutes.
-Press DISP once more to store the time
settings
Loudness
This feature has a gentle boost to enhance low
and high frequencies.
EQ Presets
Preset audio EQ curves are selectable:
FLAT
→
POP
→
ROCK
→
CLASSIC
→
EQ OFF
Aux-In
A 3.5mm audio cable is required (not included)
Track Functions, Play/Pause, will not be used for
this mode.
RESET FUNCTION
The RESET button is to be activated for the
following reasons:
-
Initial installation of the unit when all wiring
is completed.
-
All the function buttons do not operate.
-
Error symbol on the display.
Radio
SWITCHING TO RADIO MODE
Use the MODE button to select Radio
Radio Band
Press BAND to cycle through tuner:
→FM1→ FM2→ FM3→ AM1→ AM2
Station Selection
Press
or
to activate the automatic
seek function.
It
will
search
up/down
a
station
automatically.
Press and hold for 2 seconds until
“MANUAL” appears on the display, the
manual tuning mode is selected.
In this mode, frequencies are manually
tuned.
5 seconds after the last button has been
pressed, “AUTO” will default again.
Auto Memory Store (AMS) & Scanning
-
Automatic Memory Store
Press and Hold AS button for 2 seconds,
and it will store 18 presets (FM 1-3)