Bosean Electronic Technology Co.,Ltd
www.bosean.com
Tel:86-371-86533226
Email:
- 7 -
Fig17
Fig18
5. Low alarm setting
Enter “LA set” menu, use
▲
to adjust the cursor, use
▼
to adjust the value, choose the right value and
press “SAVE”. then it will return the normal detecting
interface show as Figure 18. If no special
requirement, please do not revised alarm value.
6. High alarm setting
The setting is same as low alarm setting. Note: High
alarm value never lower than low alarm value. If no
special requirement, please do not revised alarm
value.
Fig19
7. Unit set
Enter “Unit set” function show as Figure 19, choose
the suitable unit and save it. Note, this function can
be used on the PPM unit gas.
Fig20
8. ESC
Under the menu function interface, choose ESC,
press
to return normal detecting interface.
Fig21
9. Turn off
Under the menu function interface, choose “Turn off”,
press
▲
to turn off, press
▼
to return normal
detecting interface.
4.6 Alarm information
The following table shows the details of each alarm:
