Software update
en
37
2.
Press Start.
a
The calibration screen appears.
Then the touch display shows "Cal-
ibration complete. You can now re-
move the cover cap."
3.
Remove the cover cap.
4.
Press OK.
a
The main menu appears.
a
The appliance is now ready for
use.
Calibrating the appliance manually
1.
Pull downwards to open the status
bar in the main menu.
2.
Press in the status bar.
a
The Settings menu opens. If calib-
ration was not skipped previously,
open the Calibration menu item in
the Settings manually.
3.
Place the cover cap on the sensor.
4.
Press Start calibration.
a
The calibration screen appears.
Then the touch display shows "Cal-
ibration complete. You can remove
the cover cap."
5.
Remove the cover cap.
6.
Press OK.
a
The main menu appears.
Software update
Software updates will further optimise
your appliance and add new func-
tions.
Installing the software update
automatically
On start up, the appliance searches
for new software updates.
Requirement:
The touch display
shows "New software update is avail-
able. Do you want to update?"
▶
Press Update.
If the battery level is less than
75%, the touch display shows
"Connect your device to the char-
ger." Connect the charger.
→
a
The software update will be in-
stalled and the appliance restarts.
