operation
en
31
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
13.7 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start/Nachlegen/Pause
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows:
End
.
13.9 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 29
¡
The "Ready in" time is set and ac-
tivated.
→
1.
Press
Start/Nachlegen/Pause
.
The activated "Ready in" time is
paused.
2.
Press
Fertig in
repeatedly until the
display indicates the desired
"Ready in" time.
3.
Press
Start/Nachlegen/Pause
.
The changed "Ready in" time is ac-
tivated.
13.10 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start/
Nachlegen/Pause
.
3.
To resume the programme, after
the desired soaking time, press
Start/Nachlegen/Pause
.
13.11 Adding laundry
1.
Press
Start/Nachlegen/Pause
.
The appliance pauses.
Содержание WUU28TA8
Страница 51: ......