operation
en
29
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 28
▶
Adjust the programme settings.
→
Note:
The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note:
To prevent creasing, note the
maximum load for the programmes.
→
Requirement:
The laundry is pre-
pared.
→
1.
Open the door.
Ensure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
1.
Pull out the detergent drawer.
2.
Press down on the insert and re-
move the detergent drawer.
3.
Insert the measuring aid.
4.
Insert the detergent drawer.
13.6 Use the measuring aid
for liquid detergent
To add liquid detergent, you can use
a measuring aid in the detergent
drawer.
1.
Pull out the detergent drawer.
