background image

Faults and what to do about them       

en

37

3

 Faults and what to do about them

Faults and what to do about them

Faults

Cause/remedy

Please empty conden-

sate container

 on the 

display panel and drying 

has stopped.

Empty the condensation container; 

~

 Page 17

 and the dryer; .

If the optional condensation drain* has been installed, the drain hose may 

be blocked or kinked. Check the hose for deposits and flush the hose 

through. Lay the hose without any kinks.

Please clean lint filter

 

on the display panel.

Clean the fluff filter and press the Start button 

~

 Page 28

.

Heat exchanger is 

being rinsed

 on the dis-

play panel.

Not a fault. The heat exchanger is cleaned automatically. Do not pull out 

the condensation container while this is displayed.

Dryer will not start.

Mains plug plugged in or fuse/circuit breaker checked?

Programme selected?Select a programme.

Dryer door open? Close the door.

Is the childproof lock activated? Deactivate the childproof lock.

"Ready in" time selected? Programme starts after a delay 

~

 Page 25

.

¢

 on the display panel. Wi-Fi is switched on but a connection to your home network cannot be estab-

lished.Check whether your home network is available or try to connect to your 

home network again.

Home Connect is not 

working.

You can find solutions to problems with Home Connect at www.home-con-

nect.com

Creasing.

Creasing occurs when you have exceeded the maximum load or selected 

the wrong programme for the type of fabric. All the required information 

can be found in the programme table 

~

 Page 23

.

Remove clothes immediately after drying; creasing will occur if they are left 

in the drum.

Water is leaking out.

Not a fault; the dryer may be positioned on an incline. Level the dryer.

Programme duration dis-

played changes during 

drying.

Not a fault. The moisture sensors detect the remaining moisture in the load 

and adjust the programme length accordingly (except timed programmes).

* Depending on the model

Содержание WTYH7709ES













































Отзывы: