Bosch WTA74201SG, Инструкция по установке и эксплуатации

Страница: 32 / 40

en
Cleaning
32
D
Cleaning
Cleaning
Cleaning the dryer and the
control panel
:
Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Disconnect the dryer from the mains
before cleaning.
Clean the dryer using only water and a
soft, damp cloth.
Remove all detergent residue, spray
residue or other residues immediately.
Do not use cleaning agents or agents
for pre-treating laundry (e.g. prewash
sprays, stain removers). Do not use
high-pressure cleaners or steam jet
cleaners to clean your appliance.
Cleaning the moisture sensor
Note:
The dryer is equipped with a
stainless-steel moisture sensor. The
moisture sensor measures how damp
the laundry is.
After long periods of usage the moisture
sensor may become covered by a fine
layer of limescale or residues of
detergents and care products. Such
residues must be removed regularly as
the sensor function and in consequence
the drying result may be impaired.
Open the door and clean the moisture
sensor with a coarse sponge.
Caution!
Moisture sensor may be damaged.
Do not clean moisture sensors with
abrasives and steel wool.
Cleaning the exhaust air duct
Notes
■
Check the exhaust air duct as it may
be clogged.
■
Clean the exhaust air duct at least
once a year.
■
Do not bend the exhaust air duct.
1.
Switch off the dryer and allow it to
cool down.
2.
Disconnect the mains plug.
3.
Remove the exhaust air duct.
4.
Clean the exhaust air duct.
5.
Refit the exhaust air duct
~
Page 18 .