manualshive.com logo in svg

Bosch Worcester TDS 300, Инструкция по установке и эксплуатации, Страница: 76 / 84

Поделиться
Скачать
Bosch Worcester TDS 300 Скачать руководство пользователя страница 76

76

EXPERT MENU (FOR QUALIFIED TECHNICIANS ONLY)

6 720 644 593 (2010/04)

9.5.37 Mediterranean climate function
Menu: Expert menu > Settings > S. Europe function

The Mediterranean climate function is intended solely for use in regions where the high temperatures 
generally mean that there is no risk of frost damage.

If the collector temperature falls below 5 °C when the Mediterranean climate function is active, the 
solar pump is switched on. This means that hot water from the cylinder is pumped through the 
collector. When the collector temperature reaches 7 °C, the pump is switched off.

9.5.38 Mediterranean climate function cut-in temperature
Menu: Expert menu > Settings > S. Europe function > Switch-on temp.

When the Mediterranean climate function is active, the cut-in temperature can be changed. When the 
cut-in temperature is reached, the solar pump switches on.

The minimum difference from the cut-out temperature is 2 K.

9.5.39 Mediterranean climate function cut-out temperature
Menu: Expert menu > Settings > S. Europe function > Switch-off temp.

When the Mediterranean climate function is active, the cut-out temperature can be changed. When the 
temperature is reached, the solar pump switches off.

The minimum difference from the cut-in temperature is 2 K.

Setting range

Default setting

New setting

On, Off

Off

WARNING: 

risk of system damage due to frost!

The Mediterranean climate function does not offer an absolute guarantee of protection 
from frost damage. 

B

Only use the function in regions with very low risk of frost.

B

If necessary use a water/glycol mixture as heat transfer fluid.

Setting range

Default setting

New setting

4 °C  -  8 °C

5 °C

Setting range

Default setting

New setting

6 °C  -  10 °C

7 °C

Содержание Worcester TDS 300





















































































Отзывы:

Нет отзывов