Bosch Worcester TDS 300 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 84

background image

72

EXPERT MENU (FOR QUALIFIED TECHNICIANS ONLY)

6 720 644 593 (2010/04)

9.5.27 Pump PD operating mode
Menu: Expert menu > Settings > D: Ext. heat exchanger > PD pump operating mode

In

Auto

mode, the connected pump runs whenever the conditions for switching on are met.

Selecting the option

On

switches the pump on.

Selecting the option

Off

deactivates the pump.

9.5.28 Anti-icing valve operating mode
Menu: Expert menu > Settings > 2: Back-up htg. > Anti-icing valve operating mode

In

Auto

mode, the valve directs the flow to bypass the heat exchanger whenever the conditions for

doing so are met.

If the option

On

is selected, the valve diverts the flow to bypass the heat exchanger.

If the option

Off

is selected, the valve directs the flow through the heat exchanger.

9.5.29 Thermal disinfection
Menu: Expert menu > Settings > E: Therm. disinfection

Thermal disinfection is a preventive measure to ensure domestic hot water hygiene.

If the required temperature has not been reached by the heat from the solar system over the past 24
hours, the water in the cylinder is circulated by a pump. This ensures that the entire contents of the
cylinder are heated up by the supplementary heating system.

Afterwards, the pump for the heat exchanger (if present) starts up so as to include that circulation
system as well.

Ensure the following criteria are met in order to guarantee that thermal disinfection functions:

•

The heat output for thermal disinfection must not be greater than the maximum heat output of the
conventional supplementary heating system for the standby cylinder.

•

The piping for the thermal disinfection system should be better thermally insulated than standard.

Setting range

Default setting

New setting

Auto, On, Off

Auto

Setting range

Default setting

New setting

On, Off, Auto

Auto

WARNING:

health risk if thermal disinfection function is impaired.

B

Check the thermal disinfection function manually with the aid of a thermometer when
commissioning the system.

«
...
70
71
72
73
74
...
»

Содержание Worcester TDS 300





















































































Отзывы:

Нет отзывов

Похожие инструкции для Worcester TDS 300

Бренд: Gan Systems Страницы: 24

IP-M945A SERIES

Бренд: WEALTHTEC Страницы: 72

Z270 Gaming Pro Carbon Motherboard

Бренд: MSI Страницы: 92

Advance 10T Series

Бренд: QDI Страницы: 74

H470 AORUS PRO AX

Бренд: Gigabyte Страницы: 52

Бренд: Commell Страницы: 53

Бренд: Texas Instruments Страницы: 20

DQ45CB - Desktop Board Executive Series Motherboard

Бренд: Intel Страницы: 96

Бренд: MSI Страницы: 104

Бренд: ASROCK Страницы: 293

Бренд: EVGA Страницы: 128

Бренд: Supermicro Страницы: 88

Бренд: Wemos Страницы: 12

Бренд: Advantech Страницы: 84

Бренд: MSI Страницы: 98

FM2A75M-DGS R2.0

Бренд: ASROCK Страницы: 59

Бренд: ASROCK Страницы: 69

Бренд: Bluetechnix Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды