![Bosch WNA254U0SG Скачать руководство пользователя страница 38](http://html.mh-extra.com/html/bosch/wna254u0sg/wna254u0sg_instruction-manual-and-installation-instructions_52685038.webp)
en
Operating the appliance
38
If the following appears on the display
panel:
■
The symbol
Õ
disappears,
reloading is possible.
■
The symbol
Õ
lights up, reloading is
not possible.
To continue the programme, touch the
A
Start/Reload button. The
programme continues automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
A
button.
2.
Select another programme.
3.
And touch the
A
button again. The
new programme starts from the
beginning.
Note:
If the programme in drying
process, you can’t pause the
programme.
Cancel the programme
For programmes washing at high
temperatures:
1.
Touch the
A
button.
2.
To cool down laundry: Select
Rinse
à
.
3.
Touch the
A
button.
For programmes washing at low
temperatures:
1.
Touch the
A
button.
2.
Select
0
Spin
.
3.
Touch the
A
button.
For programmes in drying process:
1.
Touch the
A
button.
2.
Waiting for the appliance running to
cool down the laundry till the
Hot
disappeared in the display.
Programme end
End
lights up on the display and
~
and
Õ
displays are off.
If you have selected
2
, the water is only
drained after rinse process, no spin
cycle.
Notes
■
If
Hot
flashes in the display before
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
■
If you do not take laundry out within
15 mins after drying process
finished, wrinkle guard process will
start to prevent laundry getting
wrinkled. The process lasts about 30
minutes.
0:00,
£‘˜
,
£©
and
“Ÿš
will
be displayed alternately on the
display and
V
symbol will be
displayed as the status symbol. You
can touch any button to terminate
this process, then the door will be
released and laundry can be taken
out.
Removing laundry/switching
off the appliance
1.
Set programme selector to
Off
.
2.
Open the door and remove the
laundry.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.