Bosch WNA14400GR, Руководство пользователя и инструкции по установке

Страница: 45 / 56

Cleaning and maintenance
en
45
4.
Carefully unscrew the pump cover;
residual water may leak out.
Clean the interior, pump cover
thread and pump housing. The
impeller in the drain pump must be
able to rotate.
5.
Refit and screw on the pump cover.
The handle must be in a vertical
position.
6.
Close the service flap.
Note:
To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into dispenser II and start the
Άντληση (Drain)
programme.
The drain hose at the siphon
is blocked
1.
Turn the programme selector to
Off
.
Pull out the mains plug.
2.
Loosen the hose clamp. Carefully
remove the drain hose; residual
water may leak out.
3.
Clean the drain hose and siphon
connecting piece.
4.
Re-attach the drain hose and secure
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
1.
Turn off the water tap.
2.
Select the
Βαμβακερά (Cottons)
(activate
SpeedPerfect
setting)
programme.
Note:
If your appliance with
intelligent dosing system * , you also
need to deactivate the intelligent
dosing system.
3.
Select the
Έναρξη / Προσθήκη
ρούχων (Start/Reload)
button. Allow
the programme to run for approx. 40
seconds.
4.
Turn the programme selector to
Off
.
5.
Pull out the mains plug.
* Depending on the model