Bosch WNA13400EU, Инструкция по использованию и установке

Страница: 42 / 60

de
Device settings
■
Leave the washing machine door and
detergent drawer open so that any
residual water can evaporate. Always
wait for the program to end as the
appliance may still be locked. Then
switch on the device and wait for it to
unlock.
Change the volume and the drum care
warning signal
With the key ñ Finished in / Time Dry
■
the following settings can be changed at
the corresponding program selector
positions:
■
■
2: The end signal volume 3:
The key signal volume
0 = off, 1 = quiet, 2 =
medium, 3 = loud, 4
= very loud
Q
Device settings
■
4: Switching the drum care information
signal on / off
Device settings
The following settings can be changed:
Ž A
ΠOut
■
■
■
The end signal volume The key signal
volume Switch the drum care
information signal on / off
Exit setting mode
The process can now be ended and the
program selector to the position Off The
settings are saved.
To change these settings, the setting
mode must be activated.
H
Sensors
Sensors
Imbalance control system
The automatic imbalance control system
detects imbalances and ensures even
laundry distribution through repeated
spinning attempts.
1/2/3/4 ...
Program selector position
nen
For safety reasons, if the laundry is very
poorly distributed, the speed is reduced or
it is not spun.
Activate setting mode:
1. Set the program selector to position 1.
The device is switched on.
A notice: Put small and large items of
laundry in the drum.
2. The key 0 Spin
Hold down and at the same time turn
the program selector to the right to
position 2. The key0
Spin let go.
The setting mode is activated and the
default setting appears on the display
panel.
42