24
Signal
Setting the signal
1.
Activate the setting mode for the signal volume
Turn to
Off
. hold down
+
and turn one posi-
tion to the right
Press and hold the button for ap-
prox. five seconds until the display
elements light up. Setting mode is
activated.
2.
a) Set volume for
button signals
(depending on model)
press the button until the re-
quired volume is reached
Set to
Off
, which exits setting mode for
the signal volume.
2.
b) Selecting volume of the
information signals
rotate it
one step
to the
right
press the button until the re-
quired volume is reached
Set to
Off
, which exits setting mode for
the signal volume.
