Appliance settings
en
41
9.
Dry the drawer, lids and pump unit
and put them back together.
10.
Clean the inside of the detergent
drawer housing.
11.
Push in the detergent drawer.
Q
Appliance settings
Appliance settings
You can change the following settings:
■
The volume of the end signal.
■
The volume of the button signal.
■
Switching the drum care information
signal on/off.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1.
Set the programme selector to
position 1. The appliance is switched
on.
2.
Touch and hold the
0
Spin
button
and, at the same time, turn the
programme selector clockwise to
position 2. Release the
0
Spin
button.
The setting mode is activated and the
preset setting appears in the display
panel.
Changing the volume and drum care
information
Use the
ñ
Ready In
button to change
the following settings at the
corresponding programme selector
positions:
■
2: The volume of the end signal.
■
3: The volume of the button signals.
1/2/3/4...
positions on the
programme selector
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
