Bosch WGG454A0ID, Инструкция по эксплуатации и руководство по установке

Страница: 38 / 52

en
Intelligent dosing system
38
Adjusting the basic dosage
1.
Press and hold
Ž
i-DOS for approx.
three seconds.
The basic dosage setting is
displayed for one of the dispensers.
2.
Change the setting using:
ñ
Ready
In
3.
Briefly press
Ž
i-DOS.
The basic dosage setting is
displayed for the second dispenser.
4.
Change the setting using:
ñ
Ready
In
5.
Press and hold
Ž
i-DOS for approx.
three seconds, briefly press any
other selectable button or wait
approx. 10 seconds to exit setting
mode.
Notes
■
The changes are applied to all
programmes in which dosing is
possible.
■
The changes are saved until the next
time they are changed and are
retained even after the appliance has
been switched off.
Filling the dispensers
Notes
■
See the instructions in chapter
~
"Before setting up
Ž
i-DOS"
on page 36
■
If
w
or
©
flashes, fill the relevant
dispenser.
~
Page 36
Fill the dispensers as follows:
1.
Pull out the detergent drawer.
2.
Open the dispenser lids.
3.
Pour liquid detergent and fabric
softener into the relevant dispensers.
Notes
– Do not fill the dispensers above
the
max.
marking.
– See the instructions in chapter
~
"
Ž
i-DOS Setting the dosage"
on page 37
4.
Close the dispenser lids.
Note:
To prevent the detergent
drying out or drying up, do not leave
the dispenser lids open for a long
period of time.
5.
Push in the detergent drawer.