Set up and connectNL
2.
Loosen and remove all bolts of the 4
transport locks with a SW13 open-
end wrench
†
5.
Install the 4 cover caps.
6.
Push the 4 cover caps down.
3.
Remove the mains connection cable from
the holder.
4.5 Removing transport
reinforcements
4.
Remove the 4 sleeves.
1.
Loosen and remove the screws of
the vertical transport
reinforcements with a T20
screwdriver.
15
Содержание WGG256A5NL
Страница 59: ......