Bosch WGG256A5NL Скачать руководство пользователя

Страница: 11 / 60

Avoid material damageNL

▶

Make sure that the internal

diameter of the water tap is at least

17 mm.

▶

Make sure that the thread length

on the connection to the water

tap is at least 10 mm.

Water pressure that is too low or too high can
interfere with the appliance function.

▶

Make sure that the water pressure

on the water supply system is at

least 100 kPa (1 bar) and at most

1000 kPa (10 bar).

▶

If the water pressure exceeds the

specified maximum value, a

pressure reducing valve must be

installed between the drinking

water connection and the hose set

of the device.

▶

Do not connect the device to the

mixer tap of a pressureless water

heater or boiler.

Modified or damaged water hoses can

lead to material damage and damage

to the device.

▶

Never kink, pinch, modify or cut

water hoses.

▶

Only use supplied water hoses or

original spare hoses.

▶

Reuse never used water hoses.

Use with contaminated or too hot

water can cause material damage and

damage to the device.

▶

Only use the appliance with cold

tap water.

Unsuitable cleaning agents can

damage the surfaces of the device.

▶

Do not use sharp or abrasive

cleaning agents.

▶

Do not use strongly alcoholic

cleaning agents.

▶

Do not use hard scouring or

dishwashing sponges.

2 Material damage

avoid

Follow this instruction to avoid

material damage and damage to the

device.

PAY ATTENTION!

Incorrect dosage of fabric softeners,

detergents, care products and

cleaning agents can affect the

functioning of the appliance.

▶

Follow the manufacturer's dosing

recommendations.

Exceeding the maximum load

quantity affects the operation of the

appliance.

▶

Observe and do not exceed the

maximum load for each

programme.

→

†Programs", Page 27

The device is secured for transport

with transport locks. Transport locks

that have not been removed can lead

to material damage and damage to

the device.

▶

Before commissioning, remove and

store all transport locks completely.

▶

Before every transport, install all

transport locks completely to avoid

transport damage.

Improper connection of the water

inlet hose can lead to material

damage.

▶

Tighten the screw connections on

the water supply hand-tight.

▶

It is best to connect the water inlet

hose directly to the water tap

without additional connecting

elements such as adapter,

extension, valve or the like.

▶

Make sure that the valve housing of

the water inlet hose is installed

without contact with the

environment and that it is not

exposed to external forces.

Содержание WGG256A5NL





























































Результаты поиска

Содержание WGG256A5NL

Отзывы:

Похожие инструкции для WGG256A5NL

Бренды по названию

Популярные бренды

Bosch WGG256A5NL, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание WGG256A5NL

Отзывы:

Похожие инструкции для WGG256A5NL

Бренды по названию

Популярные бренды