Bosch WGG2540ESN, Руководство пользователя

Страница: 30 / 52

en
operation
30
2.
Press down on the insert and re-
move the detergent drawer.
3.
Insert the measuring aid.
4.
Insert the detergent drawer.
13.6 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
Page 29 .
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 17
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.7 Starting the programme
Requirement:
A programme is set.
→ "Setting a programme", Page 29
▶
Press .
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the "Ready in" time.
a
After the programme has ended,
the display shows: End.
13.8 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1.
Press .
The appliance pauses.
Note:
If you want to add laundry,
follow the instructions on the dis-
play.
→
"Display", Page 21
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press .
13.9 Cancelling the pro-
gramme
1.
Press .
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Sköljning
programme.
– If the water level is high, start
the
Centrifugering
programme
or select a suitable programme
for draining.
→
"Programmes", Page 24
3.
Remove the laundry.
→
"Unloading the laundry",
Page 31
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡
Rinse Stop is activated.
¡
The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.