Bosch WGG244MPFG, Руководство пользователя и инструкции по установке

Страница: 16 / 56

NL Set up and connect
3.
Open the tap carefully and check
that the connections are tight.
4.6 Adjusting the device
To reduce noises and vibrations and
to prevent the device from walking,
place the device horizontally.
1.
Loosen the lock nuts with a SW17
open-end wrench.
Water drainage connection types
The information will help you connect this
appliance to the water outlet.
PAY ATTENTION!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
Secure the water drain hose against
unintentional disconnection.
Remark: Observe the pumping
heights.
The maximum pumping height bed
The connection position
tie with a
hose clamp
(24-40 mm) bore
gene.
2.
To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
washbasin
the water drainage
feeding hose with
a bend
→ Page 30
fixate and
gene.
plastic stand
pipe with rubber
run muff or a
floor drain
the water drainage
feeding hose with
a bend
→ Page 30
fixate and
gene.
All appliance feet must be firmly
planted on the floor.
16