Bosch WGG2440REU, Руководство пользователя и инструкции по установке

Страница: 46 / 56

NLTroubleshooting
Malfunction
Cause and Troubleshooting
The program duration
changes during the wash
cycle.
Remark:When loading, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Foam control system provides an extra rinse when
foaming is too high.
▶
No error - no action required.
The water is not
visible in the drum
bar.
The water is below visible range.
▶
No error - no action required.
▶ Do not fill the device with additional water during
operation.
Drum jerks after
program start.
The cause is an internal motor test.
▶
No error - no action required.
In the compartment
there is residual water.
Insert in compartment is hidden.
▶
→ "Cleaning the detergent drawer", Page
36
Vibration and movement
of the appliance
during the spin
run.
The appliance is not leveled properly.
▶
→ "Adjusting the device", Page 16
Device feet are not fixed.
▶
Secure the device feet.
→ "Adjusting the device", Page 16
Transport protections have not been removed.
▶
→ "Remove transport locks", page 14.
Drum is spinning, er
no water flows into
the appliance.
Load recognition is active.
▶
No error, no action necessary.
Remark:The load detection can take up to 2 minutes.
strong foam
ming.
Detergent dosage is too high.
▶ Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
Reduce the amount of detergent for the next wash
with an equal load.
High spin speed
rental is not
reached.
Low spin speed is set.
▶
Set a higher spin speed for the next wash.
Less Ironingis activated.
▶
Select a suitable program for the type of fabric.
46