NLcustomer service
19.1 Product number (E-No.) and
production number
(FD)
Check for defective supply lines or
fittings up to the AquaStop
connection on the tap.
†While using an appliance
In principle, with AquaStop you do
not have to keep up with it or. turn
off the tap after use for safety
reasons. The tap should only be
turned off when you are away for a
longer period of time, for example if
you are going on holiday for a few
weeks.
The product number (E-Nr.) and the
production number (FD) can be found
on the type plate of the device.
The type plate is located depending
on the model: †on the inside of the
door. †on the inside of the bottom
holding valve.
†on the back of the device
honeycomb.
In order to quickly find your device
data and the service telephone
numbers, you can write down the
data.
19.2 AQUA-STOP guarantee
In addition to the warranty claims
against the seller based on the
purchase agreement and our
manufacturer's warranty, you will be
compensated if the following
conditions are met.
†If due to an error in the AquaStop
If water damage is caused to the
system, we will reimburse the
damage incurred by private users.
To guarantee the water security
system, the appliance must be
connected to the mains.
†The liability guarantee
applies to the life of the device.
†Condition for entitlement to
there is a guarantee that the device with
AquaStop has been set up and
connected professionally and in
accordance with our installation
instructions; this also includes the
professionally installed extension of the
AquaStop (original accessory). Our
warranty does not cover
50
