Set up and connectNL
Remark:The device has been checked
at the factory for correct operation.
Water stains may remain in the
device. The stains disappear after the
first wash.
4 Set up and connect
4.1 Unpacking device
PAY ATTENTION!
Objects that remain in the drum and
that are not intended for use with the
device can lead to material and device
damage.
▶
Before use, remove all these items
and the supplied accessories from
the drum.
The delivery consists of: †
Washing machine
†Accompanying documents †
Transport protections
†Remove transport locks", page
†cover caps
4.3 Installation site
requirements
1.
Completely remove packaging
material and protection from the
device.
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶
Do not use the appliance without
a cover.
2.
Check the device for visible
damage.
3.
Open the appliance door.
4.
Remove the accessories from the
drum.
WARNING
Risk of injury!
When used on a plinth, the device can
tip over.
▶
The device feet for commissioning
on a plinth must be absolutely
with the fixings
Page 30from the manufacturer.
5.
Close the appliance door.
4.2 Package contents
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
PAY ATTENTION!
Use with incomplete or defective
accessories may impair the function
of the device or cause material
damage and damage to the device.
▶
Do not use the device with
incomplete or defective accessories.
▶
Replace the accessories before
using the device.
PAY ATTENTION!
Freezing residual water in the device
can damage the device.
▶
Do not place and use the device in
frost-sensitive places or outdoors.
If the device is tilted more than 40°,
residual water can run out of the
device and cause material damage.
▶
Carefully tilt the device.
13