Bosch WDU8H541SN, Инструкция по эксплуатации и руководство по установке

Страница: 43 / 68

Operating the appliance
en
43
Measuring aid A* for liquid detergent
*depending on the model
Position the measuring aid A for
measuring the correct amount of liquid
detergent:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forwards,
fold it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with pretreat or when
"Finish in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Starting the programme
Touch and hold
A
button for 1~2
seconds, then release the button. The
programme starts and the appliance
door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
Note: Foam detection
If the symbol
Å
also lights up in the
display panel, the appliance has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Childproof lock
You can lock the appliance to prevent
the functions you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
E
(3s)
button for 3 seconds.
■
E
(3s)
lights up: The childproof lock
is activated.
■
E
(3s)
flashes: If the programme
and programme settings are
adjusted while childproof lock is
activated.
Note:
When the programme ends,
End
is displayed. The door is unlocked.
E
(3s)
remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
E
(3s)
button until
the
E
(3s)
indicator lamp is off.