Bosch WDU8H541SN, Инструкция по эксплуатации и руководство по установке

Страница: 38 / 68

en
Additional programme settings
38
\
Additional programme
settings
Additional programme settings
Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
Speed
Washing/drying in a shorter time while
achieving a washing/drying result that is
consistent with the normal performance.
Touch
Speed
to activate or deactivate
this additional programme setting.
Note:
With the additional
Speed
option
activated, the maximum washing load
will be reduced, and extra cooling water
will be needed for the drying process.
T
(Prewash)
Prewash for heavily soiled laundry.
Touch
T
(Prewash)
to activate or
deactivate it.
Note:
Put the detergent into dispenser
I
and
II
.
O
(Rinse plus)
Settings that can be selected:
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration, due to
additional rinse cycle.
The number of rinse cycles that the
programme actually runs depends on
the number that is set as a basic setting
for the programme.
2
(Hygiene care)
An innovative function, pretreat dry
laundry by hot air (up to 65°C) for
additional hygienic demands, followed
by a low temperature washing cycle.
Achieves both hygiene effect and fabric
care. Suitable for most non-delicate
textiles.
Note:
During this process, the drum
light will illuminate for approx. 10
minutes.
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles