en
Appliance settings
42
Removing laundry/switching
off the appliance
1.
Press the
#
button till the indicator
lamp turns off, release the button.
The appliance is switched off.
2.
Open the door and remove the
laundry.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.
■
Leave the door and detergent
drawer open so that any residual
water can evaporate.
■
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
Q
Appliance settings
Appliance settings
Automatic switch-off
If the appliance is not operated for
approx. 5 minutes (depending on the
water level inside of appliance), it will
automatically switch off before the
programme starts or after the
programme has ended. Press the
power button
#
again to switch on the
appliance.
Basic settings
To access the basic settings, touch and
hold the
Á
(Silent)
button for approx. 3
seconds. The control panel show:
You can change the following basic
settings:
■
The volume of the end signal.
■
The volume of the buttons.
■
The brightness of the Touch-Display.
■
Switching the Drum Clean
information signal on/off.