64
Transportation, e.g. if moving house
Preparatory work
1.
Turn off the tap.
2.
Release the water pressure in the supply hose.
Maintenance
– Filter in the water inlet hose
3.
Drain any residual detergent solution.
Maintenance – Drain
pump blocked
~
Page 43
4.
Isolate the washing machine from the power supply.
5.
Remove the hoses.
6.
Drain dispensers.
Installing transportation protection devices
1.
Remove covers and keep in a safe place.
If required, use a screwdriver.
2.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
²
–
Always
remove the transportation protection devices!
– To prevent unused detergent from flowing into the outlet
during the next wash cycle: Pour 1 litre of water into
dispenser
u v
and start the
Drain
programme.
