en
Appliance settings
34
Notes
■
When dosing all detergents,
cleaning aids and cleaning agents,
always follow the manufacturer's
instructions.
■
If dosing detergent manually, do not
add additional detergent to the
intelligent dosing dispenser (set
intelligent dosing to
ö
(off)). This will
prevent overdosing and foaming
■
Dilute viscous fabric softener and
fabric conditioner with water to
prevent blockages.
Dosing and adding detergent:
1.
Pull out the detergent drawer.
2.
Add the correct dosage to
compartment
v
u
depending on:
– Soiling
– Water hardness (ask your water
supply company)
– The amount of laundry
– The manufacturer's instructions
3.
Close the detergent drawer.
Q
Appliance settings
Appliance settings
You can change the following appliance
settings:
Settings that can be selected:
■
End signal
off – quiet – medium – loud – very
loud
Adjust the volume of the end signal.
■
Button signal
off – quiet – medium – loud – very
loud
Adjust the volume of the button
signals.
■
Auto power-off of the appliance
in 15 – 30 – 60 min – never
The appliance automatically
switches off after ... minutes
(= 0 kWh energy consumption); to
switch on, press the
#
main switch
button.
■
Language
German
English
...
Change the displayed language.
■
Info: Drum cleaning
on – off
This instruction reminds you to carry
out a drum cleaning programme.
■
Dispenser content:
i-DOS
i
I
w
content
Fabric softener - detergent
Select/change the dispenser
content.
■
Basic dosage:
i-DOS
i
I
w
basis
10 ml – 200 ml
Set the basic dosage in accordance
with the recommendations of the
detergent/fabric softener
manufacturer.
■
Basic dosage:
i-DOS
w
basis
10 ml – 200 ml
Set the basic dosage in accordance
with the recommendations of the
detergent manufacturer.
To change the settings, press and hold
both
Basic Settings 3 Sec.
buttons for
approx. 3 seconds.
Notes
■
The settings are retained after the
appliance is switched off.
■
If you press and hold the buttons,
the settings run through
automatically.
