Installation and connection
en
15
2.
Unscrew and remove all four
screws for the transit bolts with a
WAF 13 wrench.
1
2
3.
Pull the power cord out of the
holder.
4.
Remove the four sleeves.
5.
Put on the four cover caps.
6.
Press down on the four cover caps.
Removing the transport struts
Note:
Please read the safety informa-
the appliance safely.
1.
Unscrew and remove the screws in
the vertical transport struts using a
T20 screwdriver.
Содержание WAXH2KL0SN
Страница 54: ...en Cleaning and servicing 54 3 Connect the water inlet hose and check for leaks ...
Страница 70: ......
Страница 71: ......