Installation and connection
en
15
4.5 Removing the transport
struts
1.
Unscrew and remove the screws in
the vertical transport struts using a
T20 screwdriver.
2.
Remove the transport struts.
3.
Undo and remove the screws in
the horizontal transport strut using
a T20 screwdriver.
4.
Remove the transport strut.
4.6 Connecting the appliance
Connecting the water inlet hose
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
▶
Do not immerse the electrical
AquaStop valve in water.
1.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").