Home Connect
en
53
5.
Connect your appliance to the
Home Connect app. →
16.2 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) without
WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
briefly sets up its own Wi-Fi network.
You can connect a mobile device to
the WLAN network and transfer the
network information for the WLAN
home network (Wi-Fi) to your appli-
ance.
Requirement:
The Home Connect
app is open and you have logged on.
1.
Press and hold
Remote Start
for at least 3 seconds.
a
You are now in the Home Connect
menu.
2.
Select
Man. network log-in
.
3.
Select
Connect
4.
Confirm the message in the dis-
play.
a
flashes in the display.
a
The appliance now sets up its own
Wi-Fi network with the name (SSID)
HomeConnect.
5.
Call up the Wi-Fi settings on the
mobile device.
Connect the mobile device to the
HomeConnect Wi-Fi network and
enter the password (key) Home-
Connect.
a
Your mobile device now connects
to the appliance. The connection
process may take up to
60 seconds.
6.
Open the Home Connect app on
your mobile device and carry out
the steps in the app.
7.
In the Home Connect app, enter
the network name (SSID) and
password (key) for your home net-
work.
8.
Carry out the steps in the
Home Connect app to connect the
appliance.
a
If the display shows
Connected
and
lights up permanently, the
appliance is connected to the
home network.