Basic operation
en
43
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
Soaking laundry
You can soak the laundry before wash-
ing in the appliance by pausing the
programme.
Note:
No additional detergent is re-
quired. The soaking solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start/
Reload
.
3.
To resume the programme, after the
desired soaking time, press
Start/
Reload
.
Adding laundry
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
1.
Press
Start/
Reload
.
The appliance is paused and checks
whether it is possible to add or re-
move laundry.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start/
Reload
.
Cancelling the programme
Once the programme has started, you
can cancel it at any time.
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
1.
Press
Start/
Reload
.
2.
Open the door.
The appliance door remains locked
for safety reasons if the temperature
and water levels are high.
– If the temperature is high, start the
Rinse / Freshen Up
programme.
– If the water level is high: Start the
Spin
or
Drain
programme.
3.
Remove the laundry.
Resuming the programme
when the programme status
is Rinse Hold
1.
Set the
Spin
or
Drain
programme.
2.
Press
Start/
Reload
.
Unloading the laundry
Note:
Please read the safety informa-
the appliance safely.
1.
Open the door.
2.
Remove the laundry.
Switching off the appliance
1.
Press .