en
Intelligent dosing system
46
can manually add detergent.
→
Filling the dispenser
Note
In order to use intelligent dosing, fill the
dispenser.
¡
Fill the dispenser only with suitable
"detergent and care products"
→
¡
If you change the liquid detergent
or fabric softener, empty and clean
the dispenser beforehand.
→
"Cleaning the detergent drawer",
¡
If you want to use both dispensers
for liquid detergent, adjust the
"contents of the dispenser"
→
Requirement:
/ flashes.
1.
Pull out the detergent drawer.
2.
Open the dispenser lid.
3.
Pour liquid detergent and fabric
softener into the relevant dis-
pensers.
→
4.
Close the dispenser lid.
Note:
To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
5.
Push in the detergent drawer.
6.
Dispenser contents
When it leaves the factory, the dis-
penser is set
for fabric softener .
Alternatively, you can also use this
dispenser
for a second liquid de-
tergent .
Notes
¡
If you change the content of the
dispenser, the basic dosage for
this dispenser is reset.
¡
If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
You can change dispenser contents
in the basic settings.
→
Содержание WAX32EH0ES
Страница 59: ...Cleaning and servicing en 59 3 Connect the water inlet hose and check for leaks ...
Страница 75: ......